PROTECTIVE CONCRETE COATING
MAKES SURFACES MORE STAIN RESISTANT
PROVIDES WATER REPELLANCE AND INVISIBLE FINISH

 
[ View MSDS ]  

[ View in printer friendly Adobe pdf format ]

  • Preserves original appearance of surface (is invisible). Easy and safe to apply.

  • Can be used on a wide variety of surfaces, including concrete, masonry, drywall and wood.

  • Repels water and resists oil.

  • Provides extra strength, integrity and flexibility.

  • Resists freeze-thaw damage. Easier snow/ice removal.

  • Remains resilient.

  • Enhances surface traction.

  • Resists fungus and mildew.

  • Eliminates or greatly retards efflorescence.

  • Long Lasting.

ENHANCES SLIP
RESISTANCE

 

HOW TO APPLY:
DO NOT ATOMISE! Always spot test an area prior to use to determine suitability. Always start with a clean bare surface. Remove all dirt, stains, glues and previous coatings.

  1. Using a short nap paint roller, or non atomising pump sprayer apply evenly and thinly at the rate shown on the chart. Do not over apply or allow to puddle.

  2. Allow at least 24 hours to dry thoroughly.

  3. Mask and protect areas not intended to be applied.

ESTIMATED M2 PER LITRE
Adobe
Concrete
Brick
Pavers
Clay Tile
Grout
Limestone
Stucco
Slate 		5 - 7
4.5 - 7
7 - 12
7 - 11
9 - 16
7 - 16
4.5 - 7
7 - 16
9 - 11

Ready to Use
DO NOT DILUTE

OTHER IMPORTANT NOTES & PRECAUTIONS:
Protect areas not intended for coverage as product is very difficult to remove when dry and may etch or damage, White precipitate may form if Surface Repeller is over applied. Surface should be washed and may need scrubbing if this occurs.

Do not apply when ambient temperature is below 10C

Do not apply on exterior installations when rain is expected during the next 24 hours.

Do not apply on hot surfaces. On hot days apply early morning or the cool evening.

Surface Repeller has a minor almost insignificant trace of VOC.

Incidental skin contact should not be hazardous, but ingestion or eye contact should be avoided.

We recommend use of a painters mask during application.

Do not apply to surface in full sun or if temperature is over 24C.

Refer to MSDS

UV Resistant - Waterborne - Non Flammable - Odourless - User Friendly - Non Toxic

Manufacturers of the world's most technically advanced systems for permanent concrete repair, moisture proofing and protection treatments.
20 Litres PROTECTIVE CONCRETE COATING MAKES SURFACES MORE STAIN RESISTANT & PROVIDES WATER REPELLENCE WITH AN INVISIBLE FINISH

Best viewed with Internet Explorer with screen resolution set to 1024 x 768

 This page was last updated on Monday November 24, 2008 22:54:02
Web design - Lozza - for Protecta-Crete™ trading as Protect Crete Pty Ltd and PROTOCRETE™ - Copyright (c) 2006-2008