Protect Crete are manufacturers of the world's most technically advanced systems for permanent concrete repair, moisture proofing and protection treatments.

Our extensive product range has been uniquely formulated to provide you with a cost effective, safe and permanent solution that will stand the test of time.

A brief summary of all our products is listed below. Full details of our products can be accessed via the menu above.

Should you require any further information, just contact our Head Office in Australia or New Zealand and we will be pleased to be of assistance.

Protecta-Crete's Family of Products

DENSI-PROOF

• Permanently waterproofs new or old concrete
• Purges out years of contamination and odours from old slabs
• Tested to 150ft of Hydrostatic pressure & 300ft field tests
• Protects against urine and chemical ingress
• Will accept floor coverings or coatings after 24 hours
• Early access, trafficable in one hour, minimum disruption
• Environmentally safe & user friendly
• Densi-Proof - CURE & SEAL can be used as a superior curing method on fresh concrete, providing protection against surface cracking, dusting etc and at the same time gives all of the above features with no need for further application.

Ideal for new or existing slabs below or above grade, basements, lift wells, walls and soffits, car parks and ramps, freezer and cool room floors, extreme freeze thaw situations, sewerage and water tanks etc., to stop weeping water problems. The uses are unlimited!

Permanent concrete waterproofer with added ingredient for preserving embedded steel in existing concrete.

With all the benefits of Densi-Proof, use on existing concrete to stop corrosion of embedded steel/reobar without having to first remove the concrete. Inhibits chloride penetration permanently. Can also be used on new concrete.

Provides water resistance for concrete and a wide variety of other surfaces.

All the benefits of Densi-Proof and also provides extra water and oil repellence on concrete's surface.
For new or green concrete only.

Permanent waterproofer with long lasting sheen for concrete.

Provides a light-reflective, long-lasting sheen to concrete's surface.
For new or green concrete only.

Permanent waterproofer with added ingredient for deep cleaning concrete.

Deep-Clean has non-toxic cleaning ingredients that deeply penetrates and emulsifies contaminants and cleans by urging residues to the surface. Future contamination is easier to remove. an easy one-step process that densifies.

Superior cure & seal method makes sense, saves money and time at no extra cost.

Use as a superior curing method on fresh concrete, providing protection against surface cracking, dusting and at the same time gives all of the above features with no need for further application. Permanent waterproofer with industry best practice cure and seal.

Manufactured specifically for situations requiring an anti-microbial safe guard.

Complete internally and surface barrier against animal and human fluid contamination. Denies nasties of an environment to live and breed. Ideal for Animal Shelters, Nursing Homes, Dairies, etc.

Penetrative protection against acid and chemical attack in waste concrete tanks and baffles

A deep penetrating internal ingredient with a topical membrane that gives proven protection against the break down of concrete from acid and chemical attack. Easy and safe to apply at time of manufacture or prior to install. Non-flammable, odourless, environmentally neutral and cost effective.

For any adhesive fixed floor.

Finally there is a product formulated for the Flooring Installer/Contractor that is an easy and simple to apply alternative to messy two part epoxy systems etc. MOISTURE-FIX 1 is a single pack (no mixing) ready to use, easy pour and broom spread applied liquid, that deeply penetrates, forms a non destructive colloidal gel which provides a permanent moisture and vapour barrier that withstands hydrostatic pressure.

For Batten Fixed & Floating Timber floors, loose laid carpet & vinyl and for carpet tiles fixed in pressure sensitive adhesive.

Invisible surface repellent preservation treatment that enhances wet slip resistance.

A clear environmentally safe liquid for concrete, slate, brick pavers and other masonry. An aqueous penetrating treatment that provides an invisible, durable, breathable, filmless barrier beneath and on the surface preserving its original look and preventing liquid contamination penetration.

Luster Keep™ and Luster Shield™ with Densi-Proof™ as a system gives total concrete protection to Diamond polished or Burnished concrete with an attractive high gloss, easy to maintain, tough as steel, stain resistant environmentally friendly finish. It’s got the lot! Responds beautifully to High Seed Buffing. Independent slip testing carried out by Advanced Technology Testing and Research - ATTAR.

Breathable, tough, attractive, easy care, long lasting, low slip coating for polished and trowelled concrete.

Luster Shield is a tough membrane coating giving concrete an attractive sheen. Highly durable, water, acid and chemical resistant. Luster Shield enhances dry surface traction and is odourless, safe and nonflammable.

Provides water & chemical resistance with a satin finish to many different surfaces.

A strong durable, flexible and breathable film-coating that adheres tenaciously to concrete, drywall, render, masonry and wood etc. Surface Save & Seal is an excellent waterproofer and sand consolidator on pavers. It is a non flammable, odourless, penetrating coating that will dry to a clear attractive finish.

Additive to mix water for high performance extremely durable concrete.

MWE added to concrete's mix water produces an extraordinarily strong, dense, hard and virtually impermeable concrete. High performance concrete at a fraction of the usual cost.

An anti-slip solution for wet and dry surfaces.

Provides significant almost invisible anti-slip properties to ceramic tile, quarry tile, limestone, granite, smooth trowelled concrete, marble and other mineral vitreous or non-vitreous surfaces. Grippa Safe is an odourless, water clear, non-petroleum, non-flammable and user friendly product.

Safe efficient efflorescence remover.

Crete-Clean is a light to medium-duty efflorescence cleaner that is easy to use and a safe alternative to cleaning with harsh acid. Crete-Clean is safe to apply and less harmful to the concrete or masonry being cleaned. Crete-Clean has no hazardous fumes and is ecologically safe.