Permanent waterproofer with
added ingredient for deep cleaning.

 
[ View MSDS ]  

[ View in printer friendly Adobe pdf format ]

  • Allows deep cleaning of the surface

  • Densifies concrete’s matrix

  • Easy and safe to apply

  • Can penetrate beyond 200mm

  • Halts internal migration of water

  • Easy and Safe to apply

  • Preserves concrete’s integrity

  • Makes concrete more durable

  • Prevents efflorescence

  • Makes future cleaning easier

  • One time permanent application

Non Caustic
Cleaning

 

HOW TO APPLY:
Note: In hot climates, mist-wet the surface with water and remove any puddles prior to application.

  1. Use medium to high-pressure airless sprayer complete with 60cm wand and a .019” fan tip spray jet.

  2. Hold spray tip 150mm from surface.

  3. Apply at point of saturation at the rate of 4.5m2 per litre with an overlapping spray pattern of 50%.

  4. Begin applying at the lowest level elevation. For example, walls and slopes should be applied side to side, from the bottom up.

  5. Wait for between 20 - 40 minutes then wash using a medium to high pressure water blaster.

 

Ready to Use
DO NOT DILUTE

OTHER IMPORTANT NOTES:

1. Wax, paint or any thing else restricting access to concrete’s interior must be chemically or mechanically removed for PROTECT CRETE® Densi-Proof™ plus Deep-Clean™ to penetrate and work properly.

2. Areas of high porosity have a faster penetration rate. These areas appear dry immediately after spraying and will require additional product.

3. Do not apply on frozen substrate or when temperature is near freezing.

4. Before applying any paint, adhesives or any other coatings, wait 24 hours after application with PROTECT CRETE® Densi-Proof™ plus Deep-Clean™ and pressure washing, then check visually to be satisfied purging has completed (If required a second or subsequent coats may be required). Always follow coating manufactures surface requirements.

5. PROTECT CRETE® Densi-Proof™ plus Deep-clean™ may etch glass or dull brushed and shiny aluminium and can be difficult to remove from other surfaces once it dries. Cover and mask surrounding surfaces or rinse immediately if sprayed.

6. We recommend the use of a painters mask during application. Refer to MSDS.

7. Ensure you contact your nearest PROTECT CRETE® office for full technical bulletins and latest application procedures.

 

Non Toxic - Non Flammable - Odourless - Environmentally Safe - User Friendly - Zero VOC


Manufacturers of the world's most technically advanced systems for permanent concrete repair, moisture proofing and protection treatments.
20 Litres EASY ONE STEP PROCESS THAT CLEANS INTERNAL AND SURFACE CONTAMINATION. CONCRETE DENSIFIER

Best viewed with Internet Explorer with screen resolution set to 1024 x 768

 This page was last updated on Monday November 24, 2008 21:51:46
Web design - Lozza - for Protecta-Crete™ trading as Protect Crete Pty Ltd and PROTOCRETE™ - Copyright (c) 2006-2008